Saful GSM-X6 Touch button GSM+PSTN intelligent security alarm system CID wireless security system

Features:

1. To control the alarm host to arm and disarm.      

2. With the emergency key for urgent help. 

Specifications:

1. Operating power: 27A 12V alkaline battery  

2. Emitting distance: ≥100m (in open area)

3. Service life: ≤1 year

Installation and Usage:

1. For users to take along.
2. Generally, press the “Away” key to arm before leaving home; and press the “Disarm” key to disarm; “Home” is setting “Armed home”, please take notes that “Arm Home” is only effective for sensors in Perimeter Zone (door sensor\curtain PIR sensor) and sensors in Emergency Zone (Like Gas sensor\Smoke sensor\Glass sensor\Emergency button), it is not effective all sensors in Motion zone(Like wide-angle PIR).
3. Please replace the batteries after one year usage and when you feel shorter control distance.

How to program

Please refer to the descriptions of [Program Sensor]or Table 6. 

Note: 

•  You can only add 1 remote each time, totally 8 available to be added.

Each serial number is available to study 1 remote, the latter configured remote will be workable and the former one becomes not workable automatically.

Features: 

• Generally set as Perimeter zone.

If any door or window is opened, it will transmit the alarm signals to the alarm host.

Specifications:

• Operating power: 23A 12V alkaline battery        
• Frequency: 433MHZ
• Emitting distance: ≥100m (in open area)
• Service life: ≤1 year

Alarm Distance: <4cm

Installation and Usage

• Fix the part of magnet onto the door frame in a position of 1.6m above the ground to prevent any children from bumping onto it
• Fix the part of emitting onto the door frame, make sure to keep the part of magnet and part of emitting in parallel, the space between the two parts shall be less than 10mm

Upon the working light flashes frequently in red, please replace the batteries

How to program

Please refer to the descriptions of  [Set Smart Zone].

Note: 

You can only add 1 wireless door magnet each time, totally 4 available to be added.
Each serial number is available to study 1 wireless door magnet, the latter configured wireless door magnet will be workable and the former one becomes not workable automatically.

• Mainly monitor and control indoor space, generally set as Motion zone.

When human body enters into etecting area, the sensor will transmit alarm signals to the alarm host.

• Operating power: 9V alkaline battery
• Emitting distance: ≥100m (in open area)
• Service life: ≤1 year

Detecting distance: 110° 10×10m

• Fix the bracket on suitable wall surface or in wall corner at a distance of 2~2.4m above the ground;
• Open the sensor shell to connect the batteries well and adjust jumper line (short circuit “5S”: The sensor will detect once every 5 seconds; short circuit “5MIN”: The sensor will detect once every 5 minutes;
• Suggestion: short circuit “5S” for testing and “5MIN” for normal use;
• Fix the sensor onto the bracket;
• Adjust the sensor to a proper angle and then slide the power switch on the side to “ON”, and it will enter into the normal working state after 30 seconds;

Upon the working light flashes frequently in green, please replace the batteries.

• You can only add 1 wireless wide-angle PIR sensor each time, totally 4 available to be added.

Each serial number is available to study 1 wireless wide-angle PIR sensor, the latter configured wireless wide-angle PIR sensor will be workable and the former one becomes not workable automatically.

Work with alarm host, wireless receiving alarm signals, spot alarming with sound and flash 

With power plug, usually for indoor use.

Operating Power: 100~240VAC
Receiving Distance:≥100 M(In open area)

Plug the wireless siren into suitable indoor power socket 

Suggestion: Generally around 1.8M from the ground 

You can only add 1 wireless siren each time.
When configure the wireless siren, you can only operation on the keypad of the alarm host.
One siren can be studied to at most 10 wireless alarm hosts, multi wireless sirens are available to be added for each alarm host.