Saful Wireless vibration detector for home alarm

Detailed description

• Name :Saful Wireless vibration detector for home alarm
• Brand :saful
• Model No. :TS-5510
• Discription:Saful Wireless vibration detector for home alarm
• Gross Weight :0.1kg
• Packing Size :64*19*13mm
• Discription:Saful Wireless vibration detector for home alarm
• Packing Size :64*19*13mm
• 1.Introduction

  ireless vibration sensor for GSM alarm system

   

   

  2. Features

  •The wireless vibration sensor door magnetic of the entry and send a alarm to scare the intruder
  •It is quite convenient and easy to use, affix the mian unit of entry alarm at the side of the door
  •It can be easily mounted to windows or doors, no tools required

  •Extremely loud instant alarm
  •Rated Voltage: DC 12V

  •Output Time: 0.5ms~50ms

   

   

  3. Tech Parameters

  Vibration sensor sensitivity	high--middle--low
  Working voltage	12VDC
  Touching max working voltage	60 VDC
  Max current	20mA
  Mini current	10mA
  Pulse output time	5mS~50mS
  Sensitivity adjusted	High (H), Middle (M), Low (L)
  Standard package	Including one transmitter and one good vibration sensor

   

   

   

  4. Packing List

  main unit*1
  

   

   

   

  5.Operation director

   

   

   

  1. Program the vibration sensor to the panel 
  A. Open the sensor, take out the insulating sheet beside the battery. The sensor can work normally then. 
  B. Program the panel to leaning status 
  C. Triggering the vibration sensor by knocking on/beside to the unit (you can also press the tamper button on the main board) the LED will flash (transmiting signal), the panel receive the sensors siganl, select zone then store it. The vibration sensor can communicate to that panel now. 
  
  2. Installation (2 ways) 
  A. Use the screw to fix it to desired place 
  B. Use the double adhesive tape to simply glue it to desire place 
  
  3. Sensitivity adjustable 
  6. The Low Battery Voltage transmitting 
  Note: The wireless senor has got a unique power-saving function, After 3 successive time triggering, it will stop working. Only after confirming that there is no vibration, shock or impact for 70 seconds continuously, the detector will then start working again. 
  
  4.Installing and testing: How to reduce the false alarm, advantage over door contact and directional PIR 
  1. When installin on the door, The vibration sensor can alarm before intruder break in, while the door contact alarm after that, 
  2. When installing on the window, it can alarm when the intruder moves or break the window 
  
  Note: It can not be installed where vibration often occurs 
  Pay attention to test when alarming: E. G. When installing it on the door, after that, knock the door, adjust the senstivity, mimic the normal knocking, make sure it would not alarm. Make it alarm when knocking it voilently 
  When installing it on the window, make it alarm when the window moves about 20cm 3. Program the vibration sensor to the panel 
  A. Open the sensor, take out the insulating sheet beside the battery. The sensor can work normally then. 
  B. Program the panel to leaning status 
  C. Triggering the vibration sensor by knocking on/beside to the unit (you can also press the tamper button on the main board) the LED will flash (transmiting signal), the panel receive the sensors siganl, select zone then store it. The vibration sensor can communicate to that panel now. 
  
  5. Installation (2 ways) 
  A. Use the screw to fix it to desired place 
  B. Use the double adhesive tape to simply glue it to desire place 
  
  6. Sensitivity adjustable 

  
  7. The Low Battery Voltage transmitting 
  Note: The wireless senor has got a unique power-saving function, After 3 successive time triggering, it will stop working. Only after confirming that there is no vibration, shock or impact for 70 seconds continuously, the detector will then start working again. 
  
  Installing and testing: How to reduce the false alarm, advantage over door contact and directional PIR 
  1. When installin on the door, The vibration sensor can alarm before intruder break in, while the door contact alarm after that, 
  2. When installing on the window, it can alarm when the intruder moves or break the window 
  
  Note: It can not be installed where vibration often occurs 
  Pay attention to test when alarming: E. G. When installing it on the door, after that, knock the door, adjust the senstivity, mimic the normal knocking, make sure it would not alarm. Make it alarm when knocking it voilently 
  When installing it on the window, make it alarm when the window moves about 20cm

   

   

   

  6.Real Picture